|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smaller than angle flashing for chimneys. Convenient way to flash the wall to the roof in an end wall application.
|
Smaller than angle flashing for chimneys. Easy way to flash the wall to the roof in an end wall application.
|
Smaller than angle flashing for chimneys. Convenient way to flash the wall to the roof in an end wall application.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smaller than angle flashing for chimneys. Convenient way to flash the wall to the roof in an end wall application.
|
Smaller than angle flashing for chimneys. Convenient way to flash the wall to the roof in an end wall application.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gernat Mini Shim, Cedar Wood
|
Mini clear snow guards are manufactured in a high clarity polycarbonate plastic with UV stabilizers which provide strength and longevity. These are designed to fit between the stiffening ribs of residential metal roof panels. They have a low visibility and blend with roof materials. They can be attached with adhesives, screws or a combination of both.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TVM Sill Gasket, Polyethylene, Yellow, Foam Gasket Insulation, 50 ft Roll Length, 3-1/2 in Width, 1/4 in Thickness
|
These shims are easy to cut and have an excellent snap. Shims are 12 in long and tapered from 5/16 in down to 1/32 in. 42 shims per bundle, 12 bundles per display tray and 50 display trays per pallet.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
|
TVM Sill Gasket, Polyethylene, Yellow, Foam Gasket Insulation, 50 ft Roll Length, 5-1/2 in Width, 1/4 in Thickness
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear snow guards are manufactured in a high clarity polycarbonate plastic with UV stabilizers which provide strength and longevity. The structural rib guard is designed to fit over stiffening rib on residential panels. The surface mount are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam mounted device can be fastened, including batten and cap seam panels. Both have a low visibility and blend with roof materials and can be attached with adhesives, screws or a combination of both.
|
Designed for easy snapping and faster installations. NWS Composite shims are waterproof, resist splitting, impervious to insects and offer much greater load bearing capacity than wood. Composite Shims are 8 in long and tapered from 5/16 in down to 1/32 in. There are 32 shims per carton, 15 cartons per box and 50 boxes per pallet. Shims fit easily into a tool belt.
|
These shims are easy to cut and have an excellent snap. Shims are 8 in long and tapered from 5/16 in down to 1/32 in. 56 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet. Shims fit easily into a tool belt.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
|
Oatey? Galvanized No-Calk? roof flashings can be used in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Use Owens Corning FoamSealR? sill gasket on exterior walls to fill the gap between the sill plate and foundation wall for a tight, uniform fit that eliminates heat loss from air infiltration. Made of polyethylene foam, FoamSealR? is durable and moisture-resistant so it will remain intact for years of energy-saving performance.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Galvanized No-Calk? roof flashings can be used in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
MULTIPURPOSE ALUMINUM?MEMBRANE Aluminum Purpose is a self-adhesive membrane 1.0mm (40mil) thick composed an elastomeric bitumen. the upper face of the membrane (exposed portion) is covered with an aluminum foil. The lower face of the membrane (side self adhesive) is covered with a silicone film easily detachable. Multipurpose aluminum membrane is designed for sealing of odd jobs maintenance and repair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
TVM Sill Seal, Polyethylene, Sill Gasket, Yellow, Foam Gasket Insulation, 50 ft Roll Length, 7-1/2 in Width, 1/4 in Thickness
|
|
|
Request a Quote
