|
|
|
|
|
|
|
|
|
|
|
|
|
|
0904 is designed to finish three bullnose outside corners that adjoin at 90 deg outside angles.
|
0903 is designed to finish two bullnose outside corners that adjoin at a 90 deg angle.
|
Wallboard Tool Molded Corner Bead, 3-Way, Corner Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
|
Hyde Fiberglass Tape, 65 ft L, 2 in W, White
|
0920 is designed to finish two 350 bull outside corners, adjoining at a 90 angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hyde Peel and Stick Wall Bandage, 7 in L, 7 in W, White
|
Wallboard Tool J-Bead, 8 ft L, 1/2 in W
|
0917 joins a 3/4 in bullnose outside corner and transitions to a square bottom corner for simple installation of the baseboard.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wallboard Tool Adapter Molded Corner Bead, Corner Angle: 90 deg, 6-1/2 in H
|
BMC J-Bead, 10 ft L, 5/8 in W, 7/8 in H
|
Imperial Corner Bead, Satin, 8 ft L, 1-1/4 in W, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0937 joins to a 3/4 in bullnose splayed corner and transitions to a square bottom corner for simple installation of the baseboard.
|
FibaFuse? is an innovative paperless drywall joint tape designed for professional renovators and remodelers. FibaFuse? is a glass mat drywall tape that is ideal for use with mold-resistant and paperless drywall systems for high-humidity and moisture-prone applications. FibaFuse? is easy to cut and retains its folds, making it easy to install by hand on joints in corners. You can also use super tapers, banjos and automatic tapers to apply FibaFuse? and compound to seams.
|
For holes up to 5 in wide. Can easily be cut with household scissors for several smaller applications. Laminated construction provides multi-directional reinforcement. Two square patches included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wallboard Tool Corner Bead, Corner Radius: 10 in Inner x 18 in Outer, 8 ft L, 1-1/4 in W
|
Original corner bead design featuring a slight radius on nose.
|
Wallboard Tool Round Corner Bead, Corner Radius: 15 in Inner x 20 in Outer, Corner Angle: 90 deg, 8 ft L, 7/8 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
J bead is designed to finish rough drywall ends under doors and windows.
|
Wallboard Tool Splayed Corner Bead, Corner Angle: 120 to 140 deg, 10 ft L, 1-1/4 in W
|
LePage Polyfilla Instant Crack Filler, Net Content: 162 mL, Liquid, Tan, Squeeze Tube, Compositions: Limestone, 2-Propanol, Kaolin, Talc, Quartz (SiO2), VOC Content: <1 %, Flash Point: 23.5 deg C, Boiling Point: 83 deg C, Density: 2.1, Specific Gravity: 1.6, Applicable Materials: Masonry, Wood, pH Range: 7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sheetrock Corner Bead, Paper Faced Metal, 8 ft Length, 9/16 in Radius, 90 deg Angle, Suitable for: 90 deg Outside Corner
|
Sheetrock Corner Trim, Paper Faced Metal, 8 ft L, Radius: 5/8 in, Angle: 90 deg, Suitable for: 135 deg Offset Angle on Inside Corners
|
Quicksilver? Corner bead is a hot dipped, highly durable galvanized bead that offers superior corrosion protection. This bead is ideal for humid, moisture prone conditions and high-traffic areas subject to more than normal abuse. Recognized as a superior corrosion-resistant drywall finishing corner bead, Quicksilver? corner bead provides a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated for excellent joint compound adhesion.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trim-Tex Bullnose Corner Bead and Archway, 8 ft L, 1 in W, Radius: 3/8 in
|
Wallboard Tool Tear Away L Bead, Corner Radius: 10 in Inner x 18 in Outer, 10 ft L, 1/2 in W
|
Wallboard Tool Corner Bead, Corner Radius: 10 in Inner x 18 in Outer, Corner Angle: 90 deg, 10 ft L, 1-1/4 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richard Self-Adhesive Drywall Tape, 150 ft L, 2 in W, White
|
Imperial J-Trim Corner Bead, 10 ft L, 1/2 in W
|
DAP? wallboard joint compound is a ready-to-use joint compound for smooth, high-quality finishing of gypsum panel joints. It is preferred by professionals for embedding reinforcing tape, finishing gypsum panel joints, nailheads and metal corner beads. DAP? wallboard joint compound shrinks less and is crack-resistant. It is ideal for textured finishes.
|
|
|
Request a Quote
