Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > EPOXY ADHESIVES
Sort By:
Page of 1
CEMENT MUFFLER 170G TUBE EPOXY QUICK SET AUTOBODY 25ML ITW Permatex 84125 Permapoxy Epoxy
For repairs to old and installation of new exhaust systems. Does not contain asbestos. Tested to 816 deg C (1500 deg F). Permatex???s general-purpose 5 min gel epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a blue dye indicator that disappears when it???s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies, unique indicator system takes the guesswork out of ???ready to use???. A structural adhesive designed for general-purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5 to 6 min and fixturing in 9 to 10 min. Note - will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in 5 min at room temperature. Cream appearance. Gap filling to 0.125 in. Water-resistant and good chemical resistance. Temperature range -60 to 250 deg F. Permanent strength up to 3500 psi.
8297F TEMPERATURE RESISTANT EP EPXY PLSTCWELD PTY 2OZ OFF WHT EPOXY GORILLA .85OZ
HighHeat? is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hr at room temperature. After 8 hr, it can be drilled, tapped, machined, ground, filed and painted. HighHeat? is rated at a tensile strength of 800 psi and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 deg F and intermittent heat exposure to 550 deg F. PlasticWeld? is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld? has a 20 to 25 mins work life, whereas functional cure occurs in 2 to 3 hrs. PlasticWeld? cures to an off-white color, is rated at a tensile strength of 350 psi. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Gorilla takes epoxy to the Gorilla tough level. With its superior solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.
Lepage 1028091 Speed Set Epoxy EPXY PTY WTRWD 2OZ OFF WHT ITW Permatex 84162 Permapoxy Epoxy
LEPAGE Speed Set Instant Mix epoxy is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high-strength bond which starts to set in 5 mins and reaches handling strength in 1 hr. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Speed Set Instant Mix epoxy does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. WaterWeld? will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks. Setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld? has a set time of 15 to 25 mins and sets hard in one hr. WaterWeld cures to an off-white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F. Versatile, easy-to-use, general-purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in 1 mins, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60 to 180 deg F. Permanent strength up to 2500 psi.
EPXY KWIKWOOD PTY 1OZ LT TAN 50112F QUICK SETTING 2 PART EP EPXY PLSTC STL 25ML MTLAC GRY
KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15 to 25 mins work life. After 60 mins, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color. ClearWeld? is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld? is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 mins and cures in 1 hr. With a tensile strength of 4400 psi, ClearWeld? sets to a hard, permanent bond. LePage? Epoxy Steel? is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high-strength bond in 5 to 12 mins. It is used as an adhesive for repairing, filling and rebuilding all metal and concrete surfaces. LePage? Epoxy Steel does not conduct electricity and can be used for sealing electrical components. It cures to a metallic gray finish and can be easily sanded or machined. It does not shrink or expand and is resistant to water and most common solvents.
50133F 2 PART BODY PANEL ADHES EPXY ORIG STL REIN 2OZ DK GRY EPXY 2OZ DK GRY STL REINFD
Plastic Bonder? is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. Plastic Bonder? has a 1:1 mixing ratio, sets in 15 mins and can be sanded after 30 mins. With a tensile strength of 3770 psi, Plastic Bonder? sets to a tan color and cures to a hard, permanent bond. J-B Weld is the original cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4 to 6 hrs to a dark grey color. A full cure is reached in 15 to 24 hrs. J-B Weld has a tensile strength of 3960 psi and sets to a hard bond overnight. It can withstand temperatures up to 550 deg F when fully cured. J-B Weld is the original cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4 to 6 hrs to a dark grey color. A full cure is reached in 15 to 24 hrs. J-B Weld has a tensile strength of 3960 psi and sets to a hard bond overnight. It can withstand temperatures up to 550 deg F when fully cured.
EPXY MARINEWD 2OZ DK GRY
J-B MarineWeld? is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld? sets in 4 to 6 hrs at room temperature and is fully cured to a dark grey color in 15 to 24 hrs. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld? has a 1:1 mixing ratio and tensile strength of 3960 psi.