|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quality electrical tape designed for general-purpose electrical applications. The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. it is a tough 7 mil tape with excellent adhesive ability and is designed for light-duty use.
|
The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. It is a tough 7 mil tape with excellent adhesive ability and is designed for light-duty use.
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHF Electrical Tape, PVC Backing, Black, 60 ft Length, 3/4 in Width
|
For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
|
For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
Special vinyl film backing coated with a non-corrosive adhesive. Excellent conformability. CSA approved with a temperature range of -7 to 80 deg C.
|
This ProSource electrical tape is UL approved black electrical insulating tape. It's 30 ft L with a PVC backing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revelation Electrical Tape, PVC Backing, Red, 66 ft Length, 3/4 in Width
|
Revelation Electrical Tape, PVC Backing, Blue, 66 ft Length, 3/4 in Width
|
Revelation Electrical Tape, PVC Backing, Yellow, 66 ft Length, 3/4 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CALTERM offers a broad selection of professional-grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. The assortments of electrical tape designed for general-purpose electrical applications and made from low-lead PVC material.
|
GB Butt Splice Connector, 600 V, 18 to 22 AWG Wire, Red
|
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tradeselect Cable Tie, Miniature, 0.12 in Diameter Minimum Bundle, 0.79 in Diameter Maximum Bundle, 4 in Length, 0.1 in Width, Nylon, Natural, 18 lb Tensile Strength
|
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
|
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tradeselect Cable Tie, Miniature, 0.12 in Diameter Minimum Bundle, 0.79 in Diameter Maximum Bundle, 4 in Length, 0.1 in Width, Nylon, Black, 18 lb Tensile Strength
|
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
|
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
|
|
|
Request a Quote
