|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
|
For home and auto applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
This simple to use cable ripper is only 4 in long to tuck neatly into your electrical tool belt. The nickel-plated finish offers corrosion-resistant durability. Handy design slits outer covering of all sizes (both old and new) of non-metallic (type NM) sheathed cable. Wire gauge etched into the handle for quick reference when stripping sheathing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 to 32, ranging from 3/4 to 3in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
Detects AC voltage without contacting live wires. For indoor use. Tri-directional momentary On/Off switch. Uses two LR44 button cell batteries, included. 50 to 600 VAC, 50 to 60 Hz operating range. Audible and visual alert. Includes snap-on pocket clip. UL listed.
|
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
Sperry Instruments Test Lead, 1000 V, Insulation Material: ABS, 40 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convenient pocket size probe allows checking of voltage potential with attached test leads or probes and patented snap-in probe storage is preset to standard wall outlet spacing.
|
Medium-duty side-cutting pliers used to cut solid or stranded copper and aluminum wire.
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.
|
The breaker finder circuit breaker locator traces circuits to detect appropriate breaker. It quickly and easily identifies correct breaker or fuse protecting a specific electrical circuit. It is designed for operation at 120 VAC, 60 Hz.
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
Gardner Bender's GUSB-3300 USB Tester is a 3 function USB tester used for checking for the presence of voltage and testing for proper wiring and polarity. The tester features a high-impact housing and a pocket clip. It features an LED that illuminates to easily indicate one of four different USB conditions dead port, ok port, reversed polarity and AC voltage present. Features a 1 year warranty.
|
Gardner Bender's innovative mini cable snake is an ultra-compact 15 ft fishtape for installing a variety of wire and cable including electrical wire, speaker wire and network cable over short runs inside walls and ceilings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
|
This tester couldn't be better. In just seconds you'll know if that battery you found in the junk drawer, basement or garage still has a charge or needs to be tossed. No outside power source needed. Simply touch either the positive or negative side of battery to the corresponding contact point on the tester face and then touch the correct test lead to opposite side of battery. The scale indicates a weak battery when the needle drops with an easy-to-read selector switch and color-coded Good/Replace indicator. Extra-features include positive and negative contact posts on the front of the tester making 9 V battery checks quick and easy and a button cell retainer with press-down test button that holds the cell in place while testing. Because this unit measures the voltage by applying an appropriate load, rather than just testing the open cell voltage you get a more accurate result. Tests 1.5 V button cells, 1.5 V AAA, N, AA, C, D cells, 1.25 V Ni-Cd rechargeable cells, 3 V lithium cells, 6 V lantern and photo light meter cells, 9 V rectangular, 12 V, 15 V Photo cells and 22.5 V photo and lantern cells with voltage rating of 1.5 V to 22.5 V. Unit includes the test leads and offers a 1 year warranty.
|
Tempered carbon steel blade and screwdriver.
|
|
|
Request a Quote
