Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION
Choose a sub category:
FIRE/SMOKE ALARMS FIRE EXTINGUISHERS MISC ALARMS / DETECTORS
CARBON MONOXIDE DETECTORS
Sort By:
Page of 1
ALRM SMK HOME&PROF WHT 4IN    DETECTOR PUMP WTR LK WH REUSBL ALRM SMK HOME&PROF WHT W/1-9V
The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four 4 in unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9 V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended. Your house systems could spring a leak at any moment. Will you hear about it the right way or discover it later, after the damage is done with the Honeywell reusable water leak alarm, you'll hear the alarm first and be a first responder. Place alarms near water heaters, sump pumps, under sinks, dishwashers, wherever there's a potential for a water disaster. If water is detected, it will sound an alarm for up to 24 hrs (depends on your battery life). It's economical to place alarms all around the house, so you can have true peace of mind. The Kidde i9060CA is a 9 V battery operated, single station smoke alarm. The i9060CA offers a Hush? button that temporarily silences nuisance alarms. This smoke alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
ALRM SMK BATT PWRD WHT W/9V   ALRM SMK BATT PWRD WHT 1-1/2IN ALRM SMK IONIZATION WHT
The Kidde i9070CA is a 9 V front-loading battery operated, single station smoke alarm. The i9060CA offers a Hush? button that temporarily silences nuisance alarms. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. The Kidde i9080CA is a 9 V battery operated, single station smoke alarm. The i9080CA offers a Hush? feature that temporarily silences nuisance alarms and a safety light, powered by a separate 9 V battery, that illuminates when an alarm sounds to guide your way to safety. This smoke alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. The Kidde i12060ACA is a 120 VAC, wire in smoke alarm with front loading 9 V battery backup that can function as a stand-alone unit or interconnect with up to 24 Kidde devices (of which 18 can be initiating). The Kidde i12060ACA provides continuous protection against smoke and fire hazards, even during power outages. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
ALRM SMK PHOTOELEC WHT 120V   ALRM SMK PHOTOELECTRIC WHT    EXTINGUISHER FIRE WHITE 5-B:C
The Kidde p12040CA is a 120 VAC, wire-in smoke alarm with 9 V battery backup that can function as a stand-alone unit or interconnect with up to 24 Kidde devices (of which 18 can be initiating). The Kidde p12040CA provides continuous protection against smoke and fire hazards, even during power outages. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Kidde Smoke Detector, Photoelectric Sensor, White, Includes: 9 V Battery Suitable for use on class B (liquids and gases) and class C fires (energized electrical equipment). The 468031MTL Home Series white fire extinguisher comes equipped with a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status. "BC" rated fire extinguishers won't fuse with and damage metal surfaces, making clean-up easier and less costly.
EXTINGUISHER FIRE RED 5-B:C   ALRM SMK TMPRPRF WHT 6X1-1/2IN ALRM CRBN MONOX WHT BATT OPRTD
Suitable for use on class B (liquids and gases) and class C fires (energized electrical equipment). The 466294MTL Home Series red fire extinguisher comes equipped with a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status. "BC" rated fire extinguishers won't fuse with and damage metal surfaces, making clean-up easier and less costly. The Kidde i9010CA is a 10 year, sealed battery, single station smoke alarm. The i9010CA will automatically activate when it is attached to the mounting bracket. There are no pull-tabs, no switches, everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the low battery chirp and making it safe for disposal. The i9010CA offers a Hush? button that temporarily silences nuisance alarms. This smoke alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Kidde 900-0233 (model KN-COB-B-LS-CA) is a 3AA, battery operated carbon monoxide alarm that uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The battery operated CO alarm provides continuous monitoring of CO levels and includes multiple mounting options allowing installation on a wall or tabletop. The 900-0233 is suitable for all living areas and has a 10 years limited warranty.
EXTINGUISHER FR WHT 1-A:10-B:C ALRM SMK 2PC KT WHT 9V BATT   ALRM DETECT WTR OVRFLW WHT
Suitable for use on class A (trash, wood and paper), class B (liquids and gases) and class C fires (energized electrical equipment). The 468030MTL Home Series multi-purpose white fire extinguisher comes equipped with a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status. The Kidde i9060 is a battery operated, single station smoke alarm. This unit provides a level of protection that you have come to expect in a Kidde product. The Kidde i9060 is designed to alert you and your family to the dangers of smoke and fire. This smoke alarm features an ionization sensor that protects best against fast flaming and other types of fires. The i9060 is powered by a 9 V battery and offers a Hush? feature that temporarily silences nuisance alarms. Water damage is the most common cause of insurance claim in North America and can cost tens of thousands of dollars to repair. This easy-to-use water detector can give you peace of mind by alerting you to leaks before damage is caused. Avoid or minimize damage from faulty appliances, burst pipes, sewer backups, leaky roofs, heavy rainfall, overland flooding and more.
ALRM SMK KTN BATT PWRD WHT    EXTINGUISHER FR RED 1-A:10-B:C ALRM SMK BDRM BATT PWRD WHT
The innovative design allows for automatic activation once the unit is attached to the mounting bracket there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The P3010K-CA contains a 10 years tamper proof battery that eliminates the need for battery replacement and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Suitable for use on class A (trash, wood and paper), class B (liquids and gases) and class C fires (energized electrical equipment). The 466296 Home Series multi-purpose red fire extinguisher comes equipped with a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status. The Kidde P3010B-CA is a 10 year, sealed battery, smoke alarm with photoelectric sensing technology and Hush feature. The 85 dB alarm tone is accompanied by a voice warning feature. The alarm will automatically activate when it is attached to the mounting bracket, there are no pulltabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The P3010B-CA contains a 10 years tamper-proof battery that eliminates the need for battery replacement and ends worry of unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
ALRM DIG WHT 13X7.5X4CM       ALRM SMK PHOTOELECTRIC WHT    ALRM SMK HALLWAY BATT PWRD
The Kidde 900-0230 (model KN-COPP-B-LS-CA) is a 3AA, battery operated carbon monoxide alarm which includes a digital display feature and uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The battery operated CO alarm provides continuous monitoring of CO levels and includes multiple mounting options allowing installation on a wall or tabletop. The 900-0230 is suitable for all living areas and has a 10 years limited warranty. The Kidde Pi2010CA is a 120 VAC, wire-in smoke alarm with 9 V battery backup that can function as a stand-alone unit or interconnect with up to 24 Kidde devices (of which 18 can be initiating). The Kidde Pi2010CA provides continuous protection against smoke and fire hazards, even during power outages. This smoke alarm combines both photoelectric and ionization sensors to offer the best protection against both fast flaming and slow smoldering fires. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. The Kidde P3010H-CA is a 10 year, sealed battery, smoke alarm with photoelectric sensing technology and Hush feature. The 85 dB alarm tone is accompanied by a voice warning feature. The alarm will automatically activate when it is attached to the mounting bracket. There are no pulltabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The P3010H-CA contains a 10 years tamper-proof battery that eliminates the need for battery replacement and ends worry of unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
DETECT CRBN MONOXIDE WHT      DETECT CRBN MONOXIDE WHT      ALARM CO DIGITAL WHITE PLUG IN
The Kidde C3010-CA is a 10 year sealed battery, carbon monoxide alarm that uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The C3010-CA alarm will automatically activate when it is attached to the mounting bracket. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. A screwdriver can be used to deactivate the unit, stopping the end-of-life chirp and making it safe for disposal. The Kidde C3010-D-CA is a 10 years sealed battery, carbon monoxide alarm which includes a digital display feature and uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The C3010-D-CA alarm will automatically activate when it is attached to the mounting bracket. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. A screwdriver can be used to deactivate the unit, stopping the end-of-life chirp and making it safe for disposal. The Kidde 900-0076 (Model KN-COPP-3) is a 120 VAC powered, plug-in carbon monoxide alarm with battery backup and a digital display. The KN-COPP-3 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The 900-0076 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm gives you several mounting options, including direct-plug, a 6 ft power cord or table top.
DETECT CRBN MONOXIDE WHT      ALRM CRBN MONOXIDE NTL LP     ALRM WRLSS MTN-SNSR GRY WTRPRF
The Kidde P3010CUCA is a 10 year, sealed battery, smoke and carbon monoxide alarm that features photoelectric and electrochemical sensing technology with a Hush? feature and a voice warning to help identify the danger. The alarm will automatically activate when it is attached to the mounting bracket, there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. The Kidde 900-0113 (Model KN-COEG-3) is a 120 VAC powered, plug-in carbon monoxide, propane and natural gas alarm with battery backup and a digital display. The 900-0113 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. The 900-0113 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 PPM with its peak level memory display and will also display gas if it has detected natural gas or propane. This alarm gives you several mounting options, including direct-plug, a 6 ft power cord or table top. The Ideal Security SK602 Series wireless alert uses a motion sensor to detect motion and sends a wireless signal to the linked receiver. Once a signal is received by the receiver, the unit will chime, alarm (100 dB) or just flash lights.
EXTINGUISHER FIRE 5LB 3A40BC  ALRM GARAGE DR WRLSS WHT      EXTINGUISHER FIRE 10LB 4A60BC
The Kidde 466297 Pro Series rechargeable fire extinguisher comes equipped with a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status. Ideal Security Garage Door Alarm, Operating Range: 115 ft The Kidde 466298 Pro Series rechargeable fire extinguisher comes equipped with a stainless steel cylinder, a tough metal handle and is fitted with a pressure gauge that provides at-a-glance status.