Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL)
Choose a sub category:
PUMP TANKS WELL & JET PUMP ACCESSORIES PITCHER PUMPS / ACCESSORIES
PRESSURE SWITCHES PRESSURE GAUGES PRESSURE REGULATING VALVES
AIR VOLUME CONTROLS WELL PUMP REPAIR PARTS
Sort By:
Page of 4
KIT HEAT SHRINK TUBE 2IN KIT HEAT SHRINK TUBE 10 12&14 KIT HEAT SHRINK TUBE 3IN
HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered. HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered. HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered.
VLV TNK/SNFR 1/8IN MPT VLV TNK/SNFR 1/4IN MPT VALVE LEATHER 3-1/2IN OD CYL
Boshart Air Snifter Valve, 1/8 in Connection, MPT Connection, 150 psi, Temperature Rating: -10 to 165 deg F, Brass Boshart Air Snifter Valve, 1/4 in Connection, MPT Connection, 200 psi, Temperature Rating: -40 to 225 deg F, Brass Boshart Pump Seal, Shaft Size: 3-1/2 in, Leather
GA PRESS 2IN DRY 0-30PSI GA PRESS 2IN DRY 0-200PSI GA PRESS 2IN DRY 0-100PSI
Boshart Pressure Gauge, 1/4 in Connection, Measuring Range: 0 to 30 psi Boshart PG-200 Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Measuring Range: 0 to 200 psi, Accuracy: 2 to 3 %, Dial Size: 2 in, Operating Temperature: -40 to 140 deg F Boshart Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Measuring Range: 0 to 100 psi, Accuracy: 2 to 3 %, Dial Size: 2 in, Operating Temperature: -40 to 140 deg F
GA PRESS 2IN DRY 0-100PSI DRIVE COUPLING 1-1/4IN CUP LTHR SFT 3IN 2IN L HL
Boshart Pressure Gauge, Measuring Range: 0 to 100 psi, Dial Size: 2 in Boshart Drive Coupling, Nominal Size: 1-1/4 in, Stainless Steel, Galvanized Boshart Pump Seal, Shaft Size: 2 in ID x 3 in OD, Leather
CUP LTHR 1-1/4IN 5/8IN SM HL CUP LTHR 1-3/8IN 5/8IN SM HL GA PRESS 2IN LIQ 0-100PSI
Boshart Pump Seal, Shaft Size: 5/8 in ID x 1-1/4 in OD, Leather Boshart Pump Seal, Shaft Size: 5/8 in ID x 1-3/8 in OD, Leather Boshart Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Connection Location: Back, Measuring Range: 0 to 100 psi, Accuracy: +/-1.5 %, Dial Size: 2 in, Lens Material: Polycarbonate, Liquid Filled: Glycerin, Operating Temperature: -40 to 140 deg F
DRIVE CAPS 1-1/4IN CUP LTHR 1-5/8IN 5/8IN SM HL VENTURI ADPT 1-1/4X10IN NOLEAD
Boshart Drive Cap, Nominal Size: 1-1/4 in, Stainless Steel, Black Boshart Pump Seal, Shaft Size: 5/8 in ID x 1-5/8 in OD, Leather Boshart Venturi Adapter, Nominal Size: 1-1/4 in, Galvanized, 10 in L
KIT REPAIR HAND PUMP 3IN VLV RLF 1/2IN NO LD BRZ VLV RLF 3/4IN NO LD BRZ
Boshart Hand Pump Repair Kit, Suitable for: 3 in Dia Cylinder Pump, Includes: 3 in OD Cup Leather, 3-1/2 in OD Valve Leather Boshart Pressure Relief Valve, Nominal Size: 1/2 in, Operating Pressure: 75 psi, Body Material: Brass, Spring Material: Stainless Steel, Softgoods Material: Buna-N, Dimensions: 4 in L x 2 in W x 3-1/2 in H Boshart Pressure Relief Valve, Nominal Size: 3/4 in, Operating Pressure: 75 psi, Body Material: Brass, Spring Material: Stainless Steel, Softgoods Material: Buna-N, Dimensions: 4 in L x 2 in W x 3-1/2 in H
ADAPT HVYD 1X3/4IN FPT X PEX ARR W/CLMP TORQ 1IN & 1-1/4IN PMP AIR CHRG UNIV PLUMB-EEZE
Boshart Pipe Adapter, Nominal Size: 1 x 3/4 in, FPT x PEX Connection, Brass Boshart Torque Arrestor, Black, Suitable for: 4 to 8 in Casing Pump Plumbeeze air controls are for jet systems that cure waterlogged tanks. Jet pump air controls will operate on as little as 5 in of vacuum and fits all size tanks up to and including 82 gal. No flexing diaphragm or metal springs.
SWTCH PRESS 1/4IN FPT SWTCH PRESS 1/4IN MPT SWTCH PRESS 1/4IN BARB 30-50
Boshart Pressure Switch, FPT Connection, Working Pressure: 30 to 50 psi Boshart Pressure Switch, MPT Connection, Working Pressure: 30 to 50 psi Boshart PE-PS14 Pressure Switch, Barb Connection
VALVE PRES CALIBRATD RLF 1/2IN VLV PRESS RLF ADJ 1/2IN BRZ ADAPT 1IN FPTX1IN INS
This 1/2 in calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil or air. It consists of a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is 300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar). Watts Adjustable Pressure Relief Valve, Nominal Size: 1/2 in, Body Material: Bronze, Dimensions: 12-7/8 in L x 7-1/2 in W x 8-7/8 in H Boshart Pipe Adapter, Nominal Size 1: 1 in, Nominal Size 2: 1 in, Connection Type 1: FPT, Connection Type 2: Insert