|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for heavy-duty professional use, the SwitchBlade? 10 blade replacement kit includes 10 blades, two feed screws, two set screws and a hex wrench. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.
|
DeWALT Self-Feed Bit Extension, 12 in Length
|
With an aggressive spur for fast material penetration, DeWALT? self-feed bits feature optimized cutting geometry for long life and an open tooth design for easy re-sharpening. A 7/16 in ball groove shank offers quick-change applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With an aggressive spur for fast material penetration, DeWALT? self-feed bits feature optimized cutting geometry for long life and an open tooth design for easy re-sharpening. A 7/16 in ball groove shank offers quick-change applications.
|
With an aggressive spur for fast material penetration, DeWALT? self-feed bits feature optimized cutting geometry for long life and an open tooth design for easy re-sharpening. A 7/16 in ball groove shank offers quick-change applications.
|
With an aggressive spur for fast material penetration, DeWALT? self-feed bits feature optimized cutting geometry for long life and an open tooth design for easy re-sharpening. A 7/16 in ball groove shank offers quick-change applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16 in hex shank, shank flats for better retention.
|
Milwaukee? Self-feed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, self-feed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee self-feed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these self-feed bits are resharpenable so you can keep them cutting like new.
|
Milwaukee? Self-feed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, self-feed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee self-feed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these self-feed bits are resharpenable so you can keep them cutting like new.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16 in hex shank, shank flats for better retention.
|
With an aggressive spur for fast material penetration, DeWALT? self-feed bits feature optimized cutting geometry for long life and an open tooth design for easy re-sharpening. A 7/16 in ball groove shank offers quick-change applications.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee? Self-feed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, self-feed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee self-feed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these self-feed bits are resharpenable so you can keep them cutting like new.
|
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16 in hex shank, shank flats for better retention.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
DEWALT Drill Bit, 2-1/4 in Dia, Shank Type: Hex, Quick Change Shank: Yes, Shank Diameter: 7/16 in, Point Type: Self-Feed, Carbon Steel, Black Oxide, 5-1/2 in OAL, Cutting Direction: Right Hand, Applicable Materials: Wood
|
|
|
Request a Quote
