Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
Page of 2
Stanley 51EDBC Box Rail End Cap BRACKET SINGLE WALL MOUNT ZINC National Hardware V6 Extra Heavy Door Pull
Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers. Designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place. National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel, Zinc, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
Stanley 235309 Open Bar Holder Stanley 235291 Closed Bar Holder PULL UTILITY DOOR MTL ZN 1/PK
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. A sturdy and reliable choice for general construction. Ideal for use on sheds, barns or gates. Quick and easy installation.
BRACKET SINGLE WALL GALVANIZED HOLDER BAR CLST ZINC MTL 1/PK BOXRAIL JOINNER ZINC
This product is designed so that tightening the lag screw secures the bracket around the track and holds it firmly in place. With its minimalist appearance and sleek design, this open bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation. Onward Box Rail Joint Connector, Single, Specifications: 450 lb, Steel, Zinc, Dimensions: 2-1/4 in L x 1-3/4 in W x 3-1/4 in H, Suitable for: 1-1/2 to 3-1/2 in Thick Doors
STAY ROLLER ZPLT STEEL HLDR BAR CLSD ZN MTL BRACKET SGL RAIL GLV STL
Onward Stay Roller, Roller Diameter: 2 in, Plastic/Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in L x 1-7/8 in W x 3-1/2 in H, Suitable for: 1-1/2 to 2-1/2 in Thick Doors, Includes: Flat Head Wood Screw With its minimalist appearance and sleek design, this closed bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation. Designed to join two rails, end to end and holds it in place with the screw included. Wall mounting is designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place.
BRACKET RAIL SNGL ZPLT STEEL BRACKET SGL RAIL RND LATCH JAMB SLIDING DOOR ZINC
Onward Box Rail Bracket, Single, Steel, Zinc, Dimensions: 4-1/2 in L x 1-3/4 in W x 3 in H This product is designed so that tightening the lag screw secures the bracket tightly around the track and holds the bracket firmly in place. The cam action combined with the adjustable hook firmly holds the door against the jamb.
Stanley 104331 Single Side Bracket HANGER BOXRAIL W/BSHG RLLRS ZN National Hardware V6 Extra Heavy Door Pull
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed. Onward Dual Axis Box Rail Hanger, 450 lb Weight, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Bushing Rollers, Fixed Short Threaded Mounting Pin National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, White, Steel, Vinyl-Coated, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
ROLLER STAY SLIDING DOOR ZINC GDE ASSEMBLT BTM MTL BRACKET/BOXRAIL SGL WALL MTD
Onward Adjustable Stay Roller, Number of Rollers: 1, Zinc, Dimensions: 5-1/2 in L x 3-15/16 in W x 4 in H, Suitable for: 1-1/2 to 3-1/2 in THK Aluminum, Metal Frame, Wood Sliding Doors Renin Door Guide, Metal Adjustable wall mount bracket for box track rails. Ideal for use on metal-sided or corrugated siding.
HANGER/BB BOXRAIL WHEEL ZINC STAY ROLLER LDTY STL ZN HANGER BOX RAIL DBL AXLE ZINC
Onward Double Axle Box Rail Hanger, 450 lb Weight, Bearing Type: Ball, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Ball Bearings, Short Threaded Fixed Mounting Pin Onward Stay Roller, Plastic/Steel, Zinc, Screw Mounting, Dimensions: 5-7/8 in L x 3-1/2 in W x 3-7/8 in H, Suitable for: 2 to 3-1/2 in Thick Doors, Includes: Screws Onward Dual Axis Box Rail Hanger, 450 lb Weight, Number of Rollers: 2, Bearing Type: Ball, Zinc, Dimensions: 4-1/2 in W x 1-9/16 in H, Suitable for: 2 in THK Wood Doors, Includes: Ball Bearings and Apron Mounting Hinge
HANGER BOX RAIL DBL AXLE ZINC BRACKET DBL RAIL STL W/SCREW BOXRAIL HANGER ZINC
Onward Dual Axis Box Rail Hanger, 450 lb Weight, Number of Rollers: 2, Bearing Type: Axle, Zinc, Dimensions: 4-1/2 in W x 1-9/16 in H, Suitable for: 2 in THK Wood Doors, Includes: Fixed Mounting Apron Adjustable wall mount bracket for box track rails. Ideal for use on metal-sided or corrugated siding. Onward Single Axis Box Rail Hanger, 450 lb Weight, Number of Rollers: 1, Bearing Type: Ball, Zinc, Suitable for: 1-1/2 to 3-1/2 in THK Aluminum, Metal Frame, Wood Doors, Includes: Ball Bearings and Short Threaded Mounting Pin
Stanley 131490 Adjustable Reversible Stay Roller HANGER/BB BOXRAIL WHL/APRON ZN Stanley 161760 Cam Latch
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed. Onward Dual Axis Box Rail Hanger, 450 lb Weight, Number of Rollers: 2, Bearing Type: Ball, Zinc, Suitable for: 2 in THK Wood Doors, Includes: Ball Bearings and Fixed Mounting Apron Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed.